DHC-2 Beaver: The Bush Plane Designed by the Pilots Who Flew It

by | Nov 16, 2026 | Aviation World, History & Legends | 0 comments

Just after sunrise on 10 December 2019, a 62-year-old floatplane in yellow and navy paint taxied out onto the Fraser River in Richmond, British Columbia. Its founder-pilot opened the throttle, and the world’s first all-electric commercial aircraft lifted into the air. The airframe under all that new technology was a design that had first flown 72 years earlier.

That says almost everything about the de Havilland Canada DHC-2 Beaver. It went out of production in 1967, yet airlines still fly it on scheduled routes, rebuilders still sell “zero-time” examples, and when Harbour Air wanted to prove electric flight could work for a real airline, it chose a Beaver.

Quick Facts

  • Aircraft: de Havilland Canada DHC-2 Beaver, single-engine STOL utility aircraft and bush plane
  • First flight: 16 August 1947, Downsview, Ontario (pilot Russell Bannock)
  • Engine: One 450 hp Pratt & Whitney R-985 Wasp Junior radial; Turbo Beaver uses a PT6 turboprop
  • Capacity: Up to seven passengers (Mk I); payload close to 2,000 lb even on floats
  • Production: 1,657 built by 1967, including about 60 Turbo Beaver Mk IIIs
  • Military: US Army ordered 970 as the L-20 (U-6A from 1962); flown by more than 30 nations’ armed forces
  • Electric: Harbour Air/magniX eBeaver first flew 10 December 2019 on the Fraser River

Designed by the people who would fly it

In 1946 de Havilland Canada needed civilian work. The war was over, military orders were drying up, and the company had just hired Punch Dickins as its director of sales. Dickins was one of Canada’s pioneering bush pilots, and instead of starting from wind-tunnel data, he went and asked other bush pilots what they actually needed.

The answers were blunt. They wanted extra power, short take-off and landing performance, and an airframe that could swap between wheels, skis and floats. When the engineers warned that this would make the aircraft slow in the cruise, one pilot reportedly replied: “You only have to be faster than a dog sled to be a winner.”

The details were just as practical. The Beaver got full-size doors on both sides, so it could be loaded whichever side of a dock it tied up on, and the doors were wide enough to roll in a 44-imperial-gallon fuel drum. Because it would live in the cold and the remote, the oil filler was put in the cockpit so oil could be topped up in flight.

The first DHC-2 Beaver, CF-FHB, on floats with a canoe strapped alongside at the Canada Aviation and Space Museum
CF-FHB, the first DHC-2 Beaver ever built, first flown at Downsview on 16 August 1947 and now preserved at the Canada Aviation and Space Museum in Ottawa. Photo: Pete Webber / Wikimedia Commons, CC BY-SA 2.0

A design team under Phil Garratt began work in September 1946. The aircraft was all-metal, unlike older bush types such as the Noorduyn Norseman. It was first planned around a British de Havilland Gipsy engine, so the wing was made large to keep the short-field performance. Then Pratt & Whitney Canada offered war-surplus 450 hp R-985 Wasp Junior radials at a low price. The Beaver kept its big wing and gained a lot of extra power.

On 16 August 1947, the prototype flew for the first time at Downsview, Ontario, with Second World War fighter ace Russell Bannock at the controls. In April 1948 the first production aircraft went to the Ontario Department of Lands and Forests, which had been a design partner. That very first Beaver, CF-FHB, worked as an air taxi until 1980 and is now preserved at the Canada Aviation and Space Museum in Ottawa.

The documentary Immortal Beaver on how the DHC-2 became North America’s classic seaplane.

The US Army buys a Canadian bush plane

Sales started slowly, at perhaps two or three a month. The breakthrough came from an unexpected customer. The US Army was looking for a new utility aircraft, and the competition came down to the Beaver and the Cessna 195. The Beaver won.

During the Korean War the Army ordered 970 Beavers, more than half of the type’s entire production run. In American service it was the L-20, and in 1962 the L-20A became the U-6A. The Beaver served as a utility aircraft, and as recently as 2024 the US Navy still kept a pair at its Test Pilot School, where students use them to learn how to evaluate lateral-directional flying qualities.

Black and white photo of a US Army L-20 Beaver utility aircraft in flight over farmland
A US Army L-20 Beaver in flight. The Army ordered 970 Beavers during the Korean War, more than half of all production. Photo: US Army / Wikimedia Commons, public domain

Military services from more than 30 countries eventually flew Beavers. The British Army Air Corps took 46 as the Beaver AL.1, and a Royal New Zealand Air Force Beaver supported Sir Edmund Hillary’s Commonwealth Trans-Antarctic Expedition in 1958. When production ended in 1967, 1,657 Beavers had been built, including about 60 Turbo Beaver Mk IIIs powered by a Pratt & Whitney Canada PT6 turboprop.

The floatplane that never retired

The Beaver’s real home has always been the water. Typical useful payload is close to 2,000 lb (910 kg) even on floats, and a Mk I can carry up to seven passengers. On take-off, both the flaps and the ailerons droop, an unusual arrangement that gives the aircraft its outstanding short-field performance.

Harbour Air DHC-2 Beaver floatplane C-GMKP taxiing on the water in Vancouver Harbour
Harbour Air Beaver C-GMKP in Vancouver Harbour in 2015. Beavers still fly scheduled seaplane routes around Vancouver and the islands. Photo: Rob Hodgkins / Wikimedia Commons, CC BY-SA 2.0

On the Pacific coast, the Beaver became the backbone of the seaplane airlines. Kenmore Air, based at Kenmore, Washington, rebuilds Beaver airframes with zero-hour fatigue-life ratings and holds dozens of supplemental type certificates for modifications. Its rebuilds are so well regarded that used Beavers are advertised as “Kenmore Beavers” or as having “Kenmore mods”.

North of the border, Harbour Air grew from two small seaplanes in 1982 into what it calls North America’s largest seaplane airline, with a fleet of more than 40 aircraft by 2019. Several small British Columbia airlines still fly Beavers on scheduled runs from Vancouver to the Sunshine Coast, Vancouver Island and the islands in between.

Kenmore Air shows a custom 1953 de Havilland Beaver seaplane.

Keeping them flying is not cheap. The Wasp Junior has long been out of production, so some operators have swapped it for a PT6 turboprop, gaining power, saving weight and switching to more widely available kerosene fuel. The tooling and type certificates have passed to Viking Air, which since 2006 has held the rights to all the original de Havilland Canada designs and builds replacement parts.

A Beaver on electric steroids

In March 2019 Harbour Air announced it would work with electric-motor company magniX to build an all-electric seaplane fleet. The test bed was a six-passenger DHC-2 Beaver fitted with magniX’s 750 hp (560 kW) magni500 electric propulsion system. On 10 December 2019 Harbour Air founder and chief executive Greg McDougall flew it from the airline’s terminal on the Fraser River. The flight lasted less than 15 minutes.

“For me that flight was just like flying a Beaver, but it was a Beaver on electric steroids. I actually had to back off on the power.”
Greg McDougall — Harbour Air founder and CEO, after flying the electric Beaver, December 2019 (via The Guardian)

The magniX chief executive, Roei Ganzarski, compared the moment to the Wright brothers’ first flight in December 1903. He was candid about the limits too: an aircraft like the eBeaver could fly only about 160 km on its lithium batteries, he told reporters, though that covered most of Harbour Air’s short routes.

Harbour Air electric DHC-2 eBeaver in green and blue magniX livery docked at Ganges Harbour with its nose cowling removed
Harbour Air’s electric eBeaver at Ganges Harbour, Salt Spring Island, in 2023, with the cowling off to show the electric motor installation. Photo: Norisheep / Wikimedia Commons, CC BY-SA 4.0

Certification is the hard part. As of 2024, Harbour Air was hoping to see the magniX motor and battery system certified by Transport Canada by the end of 2026, and to get the eBeaver itself type-certified by the end of 2027 so that it could carry paying passengers.

“In December 1903, the Wright Brothers launched a new era of transportation—the aviation age—with the first flight of a powered aircraft. Today, 116 years later, with the first flight of an all-electric powered commercial aircraft, we launched the electric era of aviation.”
Roei Ganzarski — CEO of magniX, Harbour Air/magniX press release, 10 December 2019

A Canadian icon

In 1987 the Canadian Engineering Centennial Board named the DHC-2 one of the top ten Canadian engineering achievements of the 20th century. The Royal Canadian Mint put it on a special-edition quarter in 1999. Harrison Ford owns one and has called it his favourite of all his aircraft.

Harbour Air’s own footage of the electric Beaver’s first test flight in December 2019.

Many aircraft are designed around a performance target. The Beaver was designed around a list of complaints from bush pilots who were tired of aircraft that could not get into a short lake, could not take a fuel drum and could not be loaded from the wrong side of the dock. Nearly eight decades later, those same answers still keep hundreds of Beavers working.

Sources: Harbour Air and magniX press release (10 December 2019), The Guardian, AOPA, FLYING Magazine

Header photo: Joe Mabel / Wikimedia Commons, CC BY-SA 3.0

Frequently Asked Questions

When did the DHC-2 Beaver first fly?
The de Havilland Canada DHC-2 Beaver first flew on 16 August 1947 at Downsview, Ontario, flown by Second World War fighter ace Russell Bannock. The first production aircraft was delivered in April 1948 to the Ontario Department of Lands and Forests, which had helped shape the design.
Why is the DHC-2 Beaver such a good bush plane?
The DHC-2 Beaver was designed from bush pilots’ own wish list: strong short take-off and landing performance, a powerful 450 hp Wasp Junior radial, and wheels, skis or floats. Doors on both sides let it load from either side of a dock and take a 44-gallon fuel drum.
How many DHC-2 Beavers were built?
De Havilland Canada built 1,657 DHC-2 Beavers before the production line closed in 1967, including about 60 Turbo Beaver Mk IIIs with PT6 turboprops. Hundreds are still flying, many rebuilt or modified by specialists such as Kenmore Air and Viking Air.
Did the US Army use the DHC-2 Beaver?
Yes. The US Army chose the DHC-2 Beaver over the Cessna 195 and ordered 970 during the Korean War, more than half of all Beavers built. In US service it was designated L-20, and the L-20A became the U-6A in 1962. The US Navy Test Pilot School still had two in 2024.
Who was Punch Dickins and what did he have to do with the Beaver?
Punch Dickins was a pioneering Canadian bush pilot who became de Havilland Canada’s director of sales after the Second World War. He gathered feedback from other bush pilots on what they needed, and that feedback, rather than wind-tunnel data, became the basis of the DHC-2 Beaver design.
What is the Harbour Air electric Beaver?
The Harbour Air eBeaver is a six-passenger DHC-2 Beaver seaplane converted to electric power with a 750 hp magniX magni500 motor. Harbour Air founder Greg McDougall flew it for less than 15 minutes on 10 December 2019, the first flight of an all-electric commercial aircraft.
Which airlines still fly the DHC-2 Beaver?
Seaplane airlines on North America’s Pacific coast are the best-known DHC-2 Beaver operators. Harbour Air and several smaller British Columbia carriers fly Beavers on scheduled routes around Vancouver, and Kenmore Air in Washington State flies and rebuilds them.

Related Posts

0 Comments

Submit a Comment

Your email address will not be published. Required fields are marked *