MV-75 Cheyenne: Bell Completes First Fuselage for Army Tiltrotor

by | Nov 17, 2026 | Aviation militaire, Nouvelles | 0 comments

It has no wings, no rotors and no engines yet. But the grey shell sitting on its stands in Wichita, with a Kansas state flag hung across its open cabin door, is the first real body of the aircraft the US Army has picked to replace the Black Hawk in its assault fleet.

On Monday 16 November 2026, Bell Textron announced that it had completed the first fuselage for the MV-75 Cheyenne, the production tiltrotor developed from the V-280 Valor demonstrator. Bell said its team designed and assembled the complete structure from nose to tail, and the fuselage has already been shipped to Amarillo, Texas, where the test aircraft is being put together.

Informations clés

  • Aéronef: Bell MV-75 Cheyenne (Cheyenne II) tiltrotor, US Army Future Long Range Assault Aircraft
  • Jalon: First fuselage completed, announced 16 November 2026
  • Construit à : Bell Wichita Assembly Center, Wichita, Kansas
  • Portée: Forward, mid and aft fuselage plus fuselage mate, designed and assembled by Bell
  • Next step: Mating with wing and nacelles at Amarillo, Texas, then full-scale structural proof-load testing
  • Other structures: First two wings completed by June 2026; first nacelles by October 2026
  • Ancestor: V-280 Valor demonstrator, first flight 18 December 2017
  • Premier vol : Date not made public

Nose to tail in Kansas

The fuselage was built at Bell’s Wichita Assembly Center (WAC), and covered every major assembly: forward fuselage, mid fuselage, aft fuselage and the final fuselage mate. Bell says its team handled the whole process, from primary structure through mating and joining to installing the fuselage skins.

The Kansas plant is new. Bell began fuselage manufacturing there in October 2025 as part of an acceleration effort directed by the Army, and formally opened the facility on 27 April 2026. Bell says the fuselage milestone comes just two years after it chose Wichita as the site for MV-75 fuselage production.

Bell’s video from the April 2026 grand opening of the Wichita Assembly Center, where the first MV-75 fuselage was built.

There is an industrial back-story too. Spirit AeroSystems built the composite fuselage for the original V-280 demonstrator. According to FlightGlobal, Bell took over MV-75 fuselage fabrication from Spirit after Boeing acquired the Wichita aerostructures company.

“This achievement is a testament to the dedication and agility of Bell and the entire MV-75 team, who rapidly established infrastructure and moved with purpose to design and assemble the first fuselage.”
Adam Blackford — General manager, Wichita Assembly Center, Bell (press release, 16 November 2026)

Wings, nacelles, fuselage: the pieces meet in Amarillo

The fuselage was the last of the big structures. Bell completed the first two MV-75 wing structures earlier in 2026, announcing in June that the first wing, finished in February, took 90 percent fewer labour hours than the initial wing of the V-22 Osprey. The second wing needed another 40 percent less.

Bell MV-75 Cheyenne tiltrotor wing structures on the assembly line surrounded by yellow work platforms
MV-75 wing structures on the assembly line, from Bell’s June 2026 announcement that the first two wings were complete. Photo: Bell Textron Inc. (press image)

In October, Bell reported that the first nacelle structures were complete at its Amarillo Assembly Center and had been fitted to the wing. The first MV-75 gearboxes also entered testing at Bell’s new drive system test lab in Grand Prairie, Texas, while flight control computers, displays and other systems were being integrated on benches in Arlington.

“After decades of building V-22 wings, we’ve learned new ways to do things better, faster and smarter by implementing these lessons into the design upfront.”
Culley Shafer — Director of operations, Amarillo, Bell (press release, June 2026)

In Amarillo, the team will now mate the fuselage with the completed wing and nacelle. The assembled airframe then goes into a purpose-built, full-scale structural test fixture, where Bell will calibrate the strain gauges and proof-load the aircraft. Bell calls it the first major test of the MV-75’s structural reliability and safety.

MV-75 Cheyenne wing with nacelle structures fitted at each end on the assembly line at Bell Amarillo
Wing and nacelle structures for the first MV-75 test aircraft at Bell’s Amarillo Assembly Center, where the new fuselage will now be mated. Photo: Bell Textron Inc. (press image, October 2026)

From Valor to Cheyenne II

The road here began with the V-280 Valor demonstrator, which first flew at Amarillo on 18 December 2017 and reached its 280-knot target speed by January 2019. In December 2022, the US Army chose it over the Sikorsky-Boeing Defiant X in the Future Long Range Assault Aircraft (FLRAA) competition, to replace the UH-60 Black Hawk in the assault role.

The production aircraft became the MV-75 and, in 2026, took the name Cheyenne II, reviving the name of the Army’s cancelled Lockheed AH-56 Cheyenne gunship. The demonstrator was designed for a crew of four and up to 14 troops.

The Bell V-280 Valor tiltrotor demonstrator N280BH flying with its rotors tilted forward
The Bell V-280 Valor demonstrator, the ancestor of the MV-75, shows its high-speed cruise configuration at the 2019 Alliance Air Show in Fort Worth. Photo: Danazar / Wikimedia Commons, CC BY-SA 4.0

When Bell won FLRAA, service entry was planned for 2030 or 2031, but the Army has since asked for the aircraft sooner. AIN reported in July that production could start as early as 2028, while the first flight date has not been made public.

Bell’s introduction to the MV-75 Cheyenne II tiltrotor.

A finished fuselage is not a flying aircraft. But with the wing, nacelles and now the body all built, the first MV-75 test aircraft has every major structure it needs. The next milestone is the one that matters most: getting it off the ground.

Sources: Bell Textron press releases (16 November, 14 October, 11 June and 27 April 2026), FlightGlobal, Defence Blog, AIN, Wikipedia (Bell V-280 Valor)

Header photo: Bell Textron Inc. (press image)

Foire aux questions

What is the Bell MV-75 Cheyenne?
The Bell MV-75 Cheyenne, also called Cheyenne II, is the tiltrotor the US Army selected in December 2022 under its Future Long Range Assault Aircraft programme to replace the UH-60 Black Hawk in the assault role. It was developed from the Bell V-280 Valor demonstrator, which first flew in December 2017.
Where is the MV-75 fuselage built?
The MV-75 fuselage is built at Bell’s Wichita Assembly Center in Wichita, Kansas. Bell began fuselage work there in October 2025 and opened the facility in April 2026. The first complete fuselage was announced on 16 November 2026 and shipped to Bell’s Amarillo Assembly Center in Texas.
What happens next for the first MV-75 test aircraft?
At Amarillo, Bell will mate the first MV-75 fuselage with the completed wing and nacelle structures. The aircraft then goes into a full-scale structural test fixture to calibrate strain gauges and proof-load the airframe, which Bell calls the first major test of the MV-75 design.
When will the MV-75 Cheyenne fly?
Bell has not made the first flight date of the MV-75 Cheyenne public. With the fuselage, wing and nacelles complete, the first test aircraft is moving toward final assembly and structural testing. AIN reported in July 2026 that production could begin as early as 2028.
Who built the V-280 Valor fuselage?
Spirit AeroSystems built the composite fuselage of the original V-280 Valor demonstrator. For the production MV-75, Bell builds the fuselage itself in Wichita; FlightGlobal reports that Bell took over the work after Boeing acquired Spirit AeroSystems.
Why is the MV-75 called Cheyenne?
The MV-75 took the name Cheyenne II in 2026, reusing the name of the Lockheed AH-56 Cheyenne, an advanced compound helicopter gunship the US Army cancelled before it entered service. Bell now refers to the production tiltrotor as the MV-75 Cheyenne.

Articles similaires

0 Comments

Submit a Comment

Your email address will not be published. Required fields are marked *