Just after sunrise on 10 December 2019, a 62-year-old floatplane in yellow and navy paint taxied out onto the Fraser River in Richmond, British Columbia. Its founder-pilot opened the throttle, and the world’s first all-electric commercial aircraft lifted into the air. The airframe under all that new technology was a design that had first flown 72 years earlier.
That says almost everything about the de Havilland Canada DHC-2 Beaver. It went out of production in 1967, yet airlines still fly it on scheduled routes, rebuilders still sell “zero-time” examples, and when Harbour Air wanted to prove electric flight could work for a real airline, it chose a Beaver.
Datos rápidos
- Aeronave: de Havilland Canada DHC-2 Beaver, single-engine STOL utility aircraft and bush plane
- Primer vuelo: 16 August 1947, Downsview, Ontario (pilot Russell Bannock)
- Motor: One 450 hp Pratt & Whitney R-985 Wasp Junior radial; Turbo Beaver uses a PT6 turboprop
- Capacidad: Up to seven passengers (Mk I); payload close to 2,000 lb even on floats
- Producción: 1,657 built by 1967, including about 60 Turbo Beaver Mk IIIs
- Militar: US Army ordered 970 as the L-20 (U-6A from 1962); flown by more than 30 nations’ armed forces
- Electric: Harbour Air/magniX eBeaver first flew 10 December 2019 on the Fraser River
Designed by the people who would fly it
In 1946 de Havilland Canada needed civilian work. The war was over, military orders were drying up, and the company had just hired Punch Dickins as its director of sales. Dickins was one of Canada’s pioneering bush pilots, and instead of starting from wind-tunnel data, he went and asked other bush pilots what they actually needed.
The answers were blunt. They wanted extra power, short take-off and landing performance, and an airframe that could swap between wheels, skis and floats. When the engineers warned that this would make the aircraft slow in the cruise, one pilot reportedly replied: “You only have to be faster than a dog sled to be a winner.”
The details were just as practical. The Beaver got full-size doors on both sides, so it could be loaded whichever side of a dock it tied up on, and the doors were wide enough to roll in a 44-imperial-gallon fuel drum. Because it would live in the cold and the remote, the oil filler was put in the cockpit so oil could be topped up in flight.

A design team under Phil Garratt began work in September 1946. The aircraft was all-metal, unlike older bush types such as the Noorduyn Norseman. It was first planned around a British de Havilland Gipsy engine, so the wing was made large to keep the short-field performance. Then Pratt & Whitney Canada offered war-surplus 450 hp R-985 Wasp Junior radials at a low price. The Beaver kept its big wing and gained a lot of extra power.
On 16 August 1947, the prototype flew for the first time at Downsview, Ontario, with Second World War fighter ace Russell Bannock at the controls. In April 1948 the first production aircraft went to the Ontario Department of Lands and Forests, which had been a design partner. That very first Beaver, CF-FHB, worked as an air taxi until 1980 and is now preserved at the Canada Aviation and Space Museum in Ottawa.
The documentary Immortal Beaver on how the DHC-2 became North America’s classic seaplane.
The US Army buys a Canadian bush plane
Sales started slowly, at perhaps two or three a month. The breakthrough came from an unexpected customer. The US Army was looking for a new utility aircraft, and the competition came down to the Beaver and the Cessna 195. The Beaver won.
During the Korean War the Army ordered 970 Beavers, more than half of the type’s entire production run. In American service it was the L-20, and in 1962 the L-20A became the U-6A. The Beaver served as a utility aircraft, and as recently as 2024 the US Navy still kept a pair at its Test Pilot School, where students use them to learn how to evaluate lateral-directional flying qualities.

Military services from more than 30 countries eventually flew Beavers. The British Army Air Corps took 46 as the Beaver AL.1, and a Royal New Zealand Air Force Beaver supported Sir Edmund Hillary’s Commonwealth Trans-Antarctic Expedition in 1958. When production ended in 1967, 1,657 Beavers had been built, including about 60 Turbo Beaver Mk IIIs powered by a Pratt & Whitney Canada PT6 turboprop.
The floatplane that never retired
The Beaver’s real home has always been the water. Typical useful payload is close to 2,000 lb (910 kg) even on floats, and a Mk I can carry up to seven passengers. On take-off, both the flaps and the ailerons droop, an unusual arrangement that gives the aircraft its outstanding short-field performance.

On the Pacific coast, the Beaver became the backbone of the seaplane airlines. Kenmore Air, based at Kenmore, Washington, rebuilds Beaver airframes with zero-hour fatigue-life ratings and holds dozens of supplemental type certificates for modifications. Its rebuilds are so well regarded that used Beavers are advertised as “Kenmore Beavers” or as having “Kenmore mods”.
North of the border, Harbour Air grew from two small seaplanes in 1982 into what it calls North America’s largest seaplane airline, with a fleet of more than 40 aircraft by 2019. Several small British Columbia airlines still fly Beavers on scheduled runs from Vancouver to the Sunshine Coast, Vancouver Island and the islands in between.
Kenmore Air shows a custom 1953 de Havilland Beaver seaplane.
Keeping them flying is not cheap. The Wasp Junior has long been out of production, so some operators have swapped it for a PT6 turboprop, gaining power, saving weight and switching to more widely available kerosene fuel. The tooling and type certificates have passed to Viking Air, which since 2006 has held the rights to all the original de Havilland Canada designs and builds replacement parts.
A Beaver on electric steroids
In March 2019 Harbour Air announced it would work with electric-motor company magniX to build an all-electric seaplane fleet. The test bed was a six-passenger DHC-2 Beaver fitted with magniX’s 750 hp (560 kW) magni500 electric propulsion system. On 10 December 2019 Harbour Air founder and chief executive Greg McDougall flew it from the airline’s terminal on the Fraser River. The flight lasted less than 15 minutes.
The magniX chief executive, Roei Ganzarski, compared the moment to the Wright brothers’ first flight in December 1903. He was candid about the limits too: an aircraft like the eBeaver could fly only about 160 km on its lithium batteries, he told reporters, though that covered most of Harbour Air’s short routes.

Certification is the hard part. As of 2024, Harbour Air was hoping to see the magniX motor and battery system certified by Transport Canada by the end of 2026, and to get the eBeaver itself type-certified by the end of 2027 so that it could carry paying passengers.
A Canadian icon
In 1987 the Canadian Engineering Centennial Board named the DHC-2 one of the top ten Canadian engineering achievements of the 20th century. The Royal Canadian Mint put it on a special-edition quarter in 1999. Harrison Ford owns one and has called it his favourite of all his aircraft.
Harbour Air’s own footage of the electric Beaver’s first test flight in December 2019.
Many aircraft are designed around a performance target. The Beaver was designed around a list of complaints from bush pilots who were tired of aircraft that could not get into a short lake, could not take a fuel drum and could not be loaded from the wrong side of the dock. Nearly eight decades later, those same answers still keep hundreds of Beavers working.
Sources: Harbour Air and magniX press release (10 December 2019), The Guardian, AOPA, FLYING Magazine
Header photo: Joe Mabel / Wikimedia Commons, CC BY-SA 3.0




0 Comments