Why Didn’t Bomber Gunners Shoot Off Their Own Tail?

by | Nov 16, 2026 | History & Legends, Military Aviation | 0 comments

Put a gunner in the top turret of a B-17 or the mid-upper turret of a Lancaster, give him a fighter crossing behind the aircraft, and his instinct is to follow it, straight across his own tail fins. With two or four heavy machine guns firing, that would have been the end of the bomber. The answer was built into the turret itself: a system that simply stopped the guns firing whenever they pointed at the aircraft.

Quick Facts

  • Name: Fire interrupter, or fire cut-off
  • How it worked: A cam or contour follower cut the firing circuit when the guns pointed at the aircraft
  • Also fitted: Limit stops and switches so the guns could not swing into the fuselage
  • British version: Cam ring and “Tabo” arms on the Lancaster’s FN50 mid-upper turret
  • B-29: Central fire control computers programmed not to fire at the aircraft
  • Not protected: Hand-held waist and nose guns
  • Not needed: Most tail turrets, whose arc never crossed their own aircraft

The Fire Interrupter

The US Navy’s wartime gunnery manual for power turrets explains it plainly. A turret that can see parts of its own aircraft has a system that stops the guns automatically when they point there. Inside the turret, a cam shaped like the outline of the aircraft, or a mechanical “contour follower”, turned with the guns. When the guns reached the edge of a tail fin, a wing or the fuselage, it opened the switch to the firing solenoids. The gunner could keep his thumbs on the triggers; nothing happened until the guns cleared the structure again.

“Every turret where this danger exists has a system of FIRE INTERRUPTION, or FIRE CUTOFF, which stops the guns automatically when they are pointed toward any part of the bomber.”
US Navy — Aircrewman’s Gunnery Manual, Power Turrets

Turrets also had limit stops, so a gunner could not swing the barrels physically into his own aircraft. On some they were simple bumpers, on others switches that halted the turret before it hit anything. Gunners were taught to check the system before each mission with a test light, which should go out just before the guns came to bear on any part of the aircraft.

Briggs-Sperry ball turret
A Briggs-Sperry ball turret. Hung under the fuselage, it could see the aircraft’s own structure above it, so its guns were protected by a contour follower. Photo: San Diego Air & Space Museum Archives, public domain.

A close look at the Sperry ball turret. Video: San Diego Air & Space Museum.

The Lancaster’s Cam Ring

British turrets used a different solution to the same problem. On the Lancaster’s Frazer-Nash FN50 mid-upper turret, a raised ring called the cam track ran around the turret ring. Arms on the gun mounting, known as Tabo arms, rode along it. Where the track rose, it lifted the guns up over the tail, the rudders and the fuselage, and an interrupter cut the firing circuit until the guns were clear. The tail turret, by contrast, looked out behind the aircraft and could never point at it, so it needed no interrupter at all. The US Navy manual says the same of the Martin tail turret: “no fire interrupter is provided.”

Frazer-Nash FN20 tail turret
A Frazer-Nash FN20 tail turret. Pointing out behind the aircraft, it could not hit its own structure, so it had no interrupter. Photo: Alan Wilson, CC BY-SA 2.0, via Wikimedia Commons.

The B-29 Did It With Computers

The B-29 Superfortress took the idea furthest. Its gunners did not sit in the turrets at all: they aimed from five sighting stations, and General Electric analogue computers moved the remote turrets, corrected for range, lead and the distance between sight and guns, and refused to fire at the aircraft. According to the Smithsonian’s National Air and Space Museum, the computers “were programmed to prohibit a gunner from accidentally firing at parts of his own aircraft.”

A wartime training film on the B-29’s central fire control. Video: Periscope Film.

Not Fail-Safe

The system was not perfect, and the manual said so. A hot gun could “cook off” a round even with the triggers released, so gunners were warned not to put complete confidence in the interrupter. And hand-held waist guns had no protection at all, beyond the gunner’s training. A B-17 pilot’s diary from North Africa, recorded by the IWM American Air Museum, notes on 18 February 1943: “New waist gunner shot hell out of tail today. Ship out for a week.” Gunners in tight formations also had to watch out for the bombers either side of them.

“It is not wise to put complete confidence in the fire interrupter.”
US Navy — Aircrewman’s Gunnery Manual, Power Turrets

Not the Same as the WWI Synchroniser

The fire interrupter is often confused with the First World War synchroniser. Fokker’s gear of 1915 timed each shot from a forward-firing gun so the bullets passed between the spinning propeller blades: the gun kept firing, just in rhythm with the engine. A turret interrupter does something simpler. It stops the guns firing altogether while they are pointing at the aircraft.

Sources: US Navy, Aircrewman’s Gunnery Manual, Power Turrets (via HyperWar); Smithsonian National Air and Space Museum, Christopher Moore, “Defending the Superbomber: The B-29’s Central Fire Control System” (12 August 2020); Smithsonian NASM, “World War I: Laboratory for the Air”; National Museum of the US Air Force, fact sheets on the B-29, B-17F Memphis Belle and Gunners; IWM American Air Museum, B-17 41-24393; Lancaster Archive, FN50 mid-upper turret; Air & Space Forces Magazine, Dik Daso, “Blades” (April 2008).

Frequently Asked Questions

Why didn’t bomber gunners shoot their own tail?
WWII power turrets had a fire interrupter, also called a fire cut-off. A cam or contour follower turning with the guns opened the firing circuit whenever the guns pointed at any part of the bomber, such as the tail, wings or fuselage, so they would not fire even with the triggers pressed.
How did the Lancaster mid-upper turret avoid hitting the tail?
The Lancaster’s Frazer-Nash FN50 mid-upper turret had a raised cam track around its ring. Arms on the gun mounting rode along it, lifting the guns over the tail and fuselage, while an interrupter cut the firing circuit until the guns were clear.
Did the B-29 have fire interrupters?
Yes. The B-29’s General Electric central fire control computers controlled its remote turrets and were programmed to stop a gunner from accidentally firing at parts of his own aircraft.
Did tail turrets have fire interrupters?
Usually not. A tail turret points out behind the aircraft, so its guns can never bear on its own structure. The US Navy gunnery manual notes that the Martin tail turret had no fire interrupter.
Did bomber gunners ever shoot their own aircraft?
Yes, occasionally. Hand-held waist guns had no fire interrupters, and a B-17 pilot’s diary from February 1943 records a new waist gunner shooting up a B-17’s tail, putting the aircraft out of action for a week. Turret guns could also cook off a round when hot.
Is a fire interrupter the same as a WWI synchroniser?
No. A WWI synchroniser, first fitted by Fokker in 1915, timed each shot so bullets passed between the propeller blades while the gun kept firing. A turret fire interrupter stops the guns firing altogether while they point at the aircraft.

Related Posts

Blohm & Voss P 170: The Luftwaffe’s “Podracer” Bomber

Blohm & Voss P 170: The Luftwaffe’s “Podracer” Bomber

It looks like something out of a science-fiction film: three engines, two of them out on the wingtips, the crew sitting at the very back and not a single defensive gun. The Blohm & Voss P 170 was Richard Vogt’s 1942 answer to the Luftwaffe’s dream of a bomber too fast to catch. It never left the drawing board.

0 Comments

Submit a Comment

Your email address will not be published. Required fields are marked *