Nanchang CJ-6 / PT-6 — History, Specs & Stories

CJ-6
Aircraft Museum · Trainer · CJ-6

Nanchang CJ-6 / PT-6
China’s Radial Trainer

China’s first home-grown aircraft design to enter mass production: a tough radial-engined trainer that taught PLAAF pilots for six decades, logged some ten million flying hours, and became a Western warbird favourite.

1958First flight
2,000+Aircraft built
285 hpHS-6A radial
10 millionFlight hours (AVIC)
Photo: Cialowicz / CC BY-SA 3.0 via Wikimedia Commons
RolePrimary and basic trainerEra1960s to presentEngineHuosai HS-6A 9-cylinder radialOriginChina · Nanchang Aircraft Factory (Hongdu)StatusIn serviceWant to fly a real military jet?

The Story

The CJ-6: how China’s first own design trained an air force

In the late 1950s China’s pilots began their flying on the CJ-5, a licence-built copy of the Soviet Yak-18. The PLAAF was not satisfied. Its engineers judged that even the improved Yak-18A would not meet Chinese needs: it wanted more power, better aerobatic performance and an aircraft that prepared students properly for jets. In late 1957 a team led by Cheng Bushi and Lin Jiahua began a new design at Shenyang. In May 1958 the programme moved to the Nanchang Aircraft Factory, where chief engineer Gao Zhenning took it into production. Although the CJ-6 looks like a Yak-18A, it is an entirely new aircraft: an all-metal semi-monocoque fuselage with flush riveting, a new wing with pronounced outer-panel dihedral, an angular fin and a retractable tricycle undercarriage.

The prototype flew on 27 August 1958, with Lu Maofan and He Yinxi at the controls. It used a Czech flat engine that proved badly underpowered, and the early trials disappointed. A revised aircraft with the Huosai HS-6, a Chinese-built copy of the Soviet Ivchenko AI-14 nine-cylinder radial, flew on 18 July 1960, according to Australian reference Aeropedia, and the type entered service in the early 1960s. In 1965 the engine was uprated to 285 hp as the HS-6A, producing the CJ-6A, the definitive version. An armed border-patrol variant, the CJ-6B, followed in small numbers, and the export name became PT-6. Nanchang, later renamed Hongdu, would go on to build jets, but for decades the radial-engined CJ-6 was the aircraft that kept its production line busy.

More than 2,000 were built, and some estimates run higher. Virtually every PLAAF pilot of the following decades took his first military flights in one, and the type was exported to Albania, Bangladesh, Cambodia, North Korea, Sri Lanka, Tanzania and Zambia. According to AVIC, by 2019 the CJ-6 had flown about ten million hours without a fatal accident attributed to design or manufacturing faults. From 1990 surplus aircraft began reaching the West, where their tough radials and low price made them popular with private owners and formation teams. In February 2019, sixty years after its first flight, the CJ-6 received a Chinese civil type certificate, opening a second career in Chinese general aviation.

It looks like a Yak-18, but almost nothing on it came from one.A Chinese original — not a copy
01The CJ-6’s development: from Yak-18 copy to Chinese design

The CJ-5 was a straightforward licence-built Yak-18 with tailwheel undercarriage and a modest radial. By 1957 the PLAAF had concluded that it, and the Soviet Yak-18A that replaced it in the USSR, would not be good enough for a fast-expanding jet air force. The new trainer had to teach tricycle-gear handling, offer full aerobatics and carry enough power for training at higher altitudes.

Design work began at Shenyang in late 1957 under Cheng Bushi and Lin Jiahua, and the programme moved to Nanchang in May 1958, as Shenyang concentrated on jet fighters. The first prototype flew on 27 August 1958 but was disappointing, largely because its Czech horizontally opposed engine lacked power. The solution was the HS-6, a locally built copy of the Soviet AI-14R radial, which transformed the aircraft. A revised prototype flew in 1960 and series production followed. It was a significant moment for Chinese industry. Up to this point China’s factories had built Soviet designs under licence; the CJ-6 was the first indigenous design to go into large-scale production and stay there for decades.

02The CJ-6 in the West: from PLAAF surplus to warbird favourite

When China began releasing surplus CJ-6s around 1990, Western private pilots discovered a cheap, robust, fully aerobatic ex-military trainer. According to Aeropedia, more than 60 were imported into Australia from October 1990, and 42 were on the Australian civil register by mid-2007. The type also appears on civil registers in the United States, the United Kingdom, Canada, New Zealand and South Africa.

Owners value the CJ-6 for exactly the qualities the PLAAF wanted: a strong airframe, a reliable nine-cylinder radial, pneumatic systems that are simple to maintain, and benign handling. Formation flying became its hallmark. In Australia the Russian Roolettes flew CJ-6s and Yak-52s in display formations, and in North America the Red Star Pilots Association serves as the type club, running formation training for CJ-6 and Yak owners. Used examples have typically sold for around US$75,000 to 85,000, a fraction of the cost of a North American T-6, which is a large part of the appeal.


Design & Engineering

What makes the CJ-6 special

01

A radial from the Yak-52’s family

The CJ-6’s HS-6 engine is a Chinese-built development of the Soviet Ivchenko AI-14, the same family that produced the Vedeneyev M-14P used in the Yak-52 and Su-26. In the CJ-6A it delivers 285 hp, and the armed CJ-6B used a 300 hp HS-6D. A nine-cylinder air-cooled radial is heavy and thirsty compared with a flat engine, but it is very tolerant of rough handling, dust and heat, which suited training fleets operating from basic airfields across China.

02

Air power, not hydraulics

Like the Yak-18 and Yak-52, the CJ-6 relies on an extensive pneumatic system. Compressed air, charged by an engine-driven compressor and stored in bottles, starts the engine and operates the retractable undercarriage, flaps and brakes. It is simple, light and easy for ground crews to maintain, and it means the aircraft can be started without external power. The undercarriage retracts forward and leaves the wheels partly exposed, which reduces damage in a wheels-up landing, a sensible feature in a trainer flown by students.

03

Built for students

The CJ-6 seats student and instructor in tandem under a long sliding canopy with full dual controls. Its tricycle gear prepared pilots for the jets they would fly next, unlike the tailwheel CJ-5 it replaced. The wing has a flat centre section and strongly dihedralled outer panels, giving stability for the novice while remaining crisp enough for loops, rolls and spins. Western owners consistently describe it as sturdy, forgiving and reliable, and AVIC credits it with some ten million hours in Chinese service.

03The CJ-6’s variants: trainer, gunship and crop-sprayer
  • CJ-6: initial production with the 260 hp HS-6.
  • CJ-6A: from 1965, with the 285 hp HS-6A; the most common version and the one most often seen in civil hands.
  • CJ-6B: armed variant for border patrol and light attack, built in small numbers in the mid-1960s, with a 300 hp HS-6D, two 7.62 mm machine guns and underwing rockets or bombs.
  • PT-6 / PT-6A: export designations, used by Bangladesh, Sri Lanka and others.
  • Haiyan: agricultural and general-aviation derivatives.
  • Civil CJ-6: type-certificated by the Civil Aviation Administration of China on 28 February 2019.

Technical Data

Nanchang CJ-6A specifications

Specifications

Crew
2 (tandem)
Length
8.46 m (27 ft 9 in)
Wingspan
10.22 m (33 ft 6 in)
Height
3.30 m (10 ft 10 in)
Empty weight
1,095 kg (2,414 lb)
Max take-off weight
1,400 kg (3,086 lb)
Powerplant
1 × Huosai HS-6A 9-cylinder air-cooled radial, 213 kW (285 hp)
Maximum speed
about 300 km/h (186 mph, 162 kt)
Never-exceed speed
370 km/h (230 mph)
Range
700 km (435 mi)
Service ceiling
6,250 m (20,500 ft)
Armament
None on the trainer; CJ-6B: 2 × 7.62 mm machine guns, rockets or light bombs

Costs & production

Used price
Typically about US$75,000 to 85,000 for a civil CJ-6A in the United States (recent listings)
Cost per flight hour
Estimate only: roughly US$300 to 500 for a private owner, based on avgas burn of a 285 hp radial plus engine and maintenance reserves; well below a T-6 Texan
Production
More than 2,000 built at Nanchang (Hongdu) from about 1960; some sources give over 3,000
Programme
Indigenous design begun 1957; civil type certificate 2019
04The CJ-6’s operating costs: a cheap radial warbird

No military operator publishes CJ-6 costs, so the useful guide is civil ownership. Western owners buy the type because it is one of the cheapest ways to fly an aerobatic ex-military aircraft: used CJ-6As have been advertised at around US$75,000 to 85,000, and Flying magazine notes its lower operating costs than larger warbirds such as the North American T-6.

Our estimate of roughly US$300 to 500 per hour combines fuel for a 285 hp radial at aerobatic and cruise power with reserves for engine overhaul and airframe maintenance. Actual costs depend heavily on how hard the aircraft is flown, the availability of HS-6 spares and whether the owner does his own maintenance, and should be treated as a range rather than a figure.


Timeline

The CJ-6 from Shenyang drawing board to civil certificate

1957

Design begins

Cheng Bushi and Lin Jiahua start work at Shenyang on a trainer to replace the CJ-5.

1958

Move to Nanchang

The programme transfers to the Nanchang Aircraft Factory in May under chief engineer Gao Zhenning.

1958

First flight

The prototype flies on 27 August, flown by Lu Maofan and He Yinxi, but is underpowered.

1960

Radial-engined prototype

A revised CJ-6 with the HS-6 radial flies on 18 July.

1962

Into service

The CJ-6 enters PLAAF service, according to AVIC.

1965

CJ-6A

The uprated 285 hp HS-6A engine produces the definitive CJ-6A.

1990

To the West

Imports to Australia begin in October; more follow to North America and Europe.

2007

Australian fleet

42 CJ-6s are on the Australian civil register by mid-year.

2019

Civil type certificate

CAAC certificates the CJ-6 for civil use on 28 February at Nanchang’s Yaohu airport.

2023

Sri Lankan crash

A Sri Lanka Air Force PT-6 crashes at China Bay on 7 August, killing two officers.


Stories & Eyewitnesses

Stories & eyewitnesses: the CJ-6 in service

People

The engineers who said no to the Yak-18A

Cheng Bushi and Lin Jiahua designed China’s first own trainer.

Read the full story
In late 1957 the obvious choice for China was to copy the Soviet Yak-18A, as it had copied the Yak-18. PLAAF engineers concluded it would not meet their needs. At Shenyang, Cheng Bushi and Lin Jiahua began a new design addressing the Yak’s shortcomings. In May 1958 it moved to Nanchang, where chief engineer Gao Zhenning set up production. The result shared the Yak’s general layout but almost none of its structure, and became the first Chinese design to be mass-produced.
Record

A first flight that was not enough

The 1958 prototype flew, but lacked the power to be a useful trainer.

Read the full story
On 27 August 1958 test pilots Lu Maofan and He Yinxi took the first CJ-6 into the air. The flight was a milestone, but the trials that followed were disappointing. The prototype’s Czech horizontally opposed engine could not give the performance the PLAAF wanted. Rather than abandon the design, Nanchang re-engined it with the locally built HS-6 radial, and the revised aircraft flew on 18 July 1960. That second start is why some references date the CJ-6’s real birth to 1960.
Training

Ten million hours

AVIC credits the CJ-6 with an extraordinary training record.

Read the full story
For six decades the CJ-6 was where a PLAAF pilot’s military flying began. When the type received its civil certificate in 2019, China’s state media reported that it had accumulated about ten million flight hours since entering service in 1962, with no fatal accident attributed to design or manufacturing defects, and that it had been exported to more than ten countries. The figure is AVIC’s own, but the scale is not in doubt: more than 2,000 were built for a training system that produced pilots by the thousand.
Combat

The armed CJ-6B

A border-patrol gunship version was built in small numbers.

Read the full story
In the mid-1960s Nanchang produced the CJ-6B, an armed variant for border patrol and light attack. It used a more powerful 300 hp HS-6D engine and carried two 7.62 mm machine guns, with provision for rockets and bombs under the wings. Production was limited, and the CJ-6B was a niche aircraft in an air force that relied on jets for combat. It remains, however, a reminder of how easily a robust piston trainer could be pressed into the counter-insurgency role.
Civil

A military trainer with a civil certificate

In 2019 China’s aviation authority certificated a sixty-year-old design.

Read the full story
On 28 February 2019, at Yaohu airport in Nanchang, the Civil Aviation Administration of China approved the CJ-6 for civil use, an unusual step for a military trainer. CAAC deputy director Li Jian said the decision reflected the aircraft’s “long service period, good operation record, and the large market demand,” as reported by People’s Daily. The certificate opened the type to China’s growing private and training market, sixty years after its first flight.
Display

The Russian Roolettes

Australia took dozens of CJ-6s and flew them in formation.

Read the full story
From October 1990 Australian warbird enthusiasts began importing surplus CJ-6s, and more than 60 arrived, according to Aeropedia. By mid-2007, 42 were registered. Their strength, simplicity and price made them ideal for formation flying, and teams such as the Russian Roolettes flew them in displays across the country. The CJ-6 became, with the Yak-52, the backbone of the Australian “red star” warbird scene.
Display

Red Star formation

In North America the type club teaches owners to fly in close formation.

Read the full story
In the United States and Canada the CJ-6 is supported by the Red Star Pilots Association, which brings together owners of Chinese and Soviet-designed trainers. Its formation clinics, featured by AOPA, teach owners the discipline of close formation flying, and groups of CJ-6s and Yak-52s regularly fly at airshows and fly-ins. Vintage Wings of Canada has described CJ-6s flown in formation by pilots from Quebec and New Jersey, an unlikely afterlife for a PLAAF ab initio trainer.
Accident

Tragedy at China Bay

A 2023 crash led Sri Lanka to ground its PT-6 fleet.

Read the full story
The Sri Lanka Air Force has used the PT-6 for basic training at its academy at China Bay, Trincomalee. On 7 August 2023 a PT-6 of No. 1 Flying Training Wing crashed within the academy premises about two minutes after take-off, killing Wing Commander Tharindu Herath and Flying Officer Peshan Warnasooriya, according to Ada Derana. A board of investigation was convened, and the air force reportedly grounded its PT-6 fleet pending its findings.
Operators

The PT-6 abroad

China exported the trainer to Asia and Africa.

Read the full story
As the PT-6, the trainer went to air forces that already flew, or would fly, Chinese jets. Bangladesh, Sri Lanka, Albania, Cambodia, North Korea, Tanzania and Zambia all received examples. For these operators it filled the same role as in China: the first step on a ladder that led to the FT-5 or FT-6 and then to Chinese fighters. Bangladesh is commonly reported to have received up to 24, and Sri Lanka still used the type for basic training in the 2020s.

Gallery

The CJ-6 in pictures

CJ-6
CJ-6Photo: ZLEA / CC BY-SA 4.0 via Wikimedia Commons
CJ-6
CJ-6Photo: ZLEA / CC BY-SA 4.0 via Wikimedia Commons
CJ-6
CJ-6Photo: Dinil Samarasinha / CC BY-SA 4.0 via Wikimedia Commons
CJ-6
CJ-6Photo: Mark Wagner / CC BY 2.5 via Wikimedia Commons

Operations

Where the CJ-6 flies and flew


Service Record

The CJ-6’s record

The CJ-6 is overwhelmingly a training aircraft with no significant combat record; the armed CJ-6B was built for border patrol in small numbers. Its achievement is its scale and longevity as China’s primary trainer for six decades.

2,000+Aircraft built
~10 millionFlight hours (AVIC, 2019)
60+ yearsIn PLAAF service

See how training and combat types compare in the military aircraft statistics database. Figures are approximate.


Questions & Answers

Everything people ask about the CJ-6

Can I fly in a Nanchang CJ-6?
MiGFlug does not offer flights in the CJ-6, but you can fly several genuine military jets today, from the L-39 Albatros to the MiG-21, see MiGFlug’s jet flights.
Is the CJ-6 a copy of the Yak-18?
No. It resembles the Yak-18A and replaced the CJ-5, a licence-built Yak-18, but it is an original Chinese design with a new structure, wing and tail.
What engine does the CJ-6 use?
The CJ-6A uses the 285 hp Huosai HS-6A, a nine-cylinder radial derived from the Soviet Ivchenko AI-14, the same family as the Yak-52’s M-14P.
How many CJ-6s were built?
More than 2,000, with some sources putting the total above 3,000.
What is the difference between the CJ-6 and PT-6?
PT-6 is the export designation of the same aircraft.
How much does a CJ-6 cost?
Used civil CJ-6As in the United States have typically been advertised at around US$75,000 to 85,000.
Is the CJ-6 still in service?
Yes. It remains in use with the PLAAF and Sri Lanka, among others, and was certificated for civil use in China in 2019.

Sources & Further Reading

Every fact, checked